In the same way that a car owner wouldn’t dream of driving their car for 100,000 miles without an oil change, a homeowner should never neglect their heating system maintenance tasks. After all, your heating system makes use of a whole myriad of moving parts that need regular care and attention.
This article presents the different ways to check and maintain your water heating systems. It presents some general maintenance advice for all homeowners. On top of that, it also delves into the specific tasks entailed by the different water heater types.
Before we delve into the maintenance tips, we would like to give our readers a couple of vital reminders.
- Safety First – Before anything else, you need to ensure that you are wearing all the protective gear that you need. This includes gloves, goggles and other protective clothes.
- These are a few simple maintenance tips for your home water heating system. While they are pretty straightforward, just keep in mind that if you feel that you are not capable of doing the task yourself, then there is always the option of bringing in a professional to do it for you.
If you are unsure on how to approach this issue, then don’t worry. We have you covered in this regard.
- Check the Pressure Valve – This is one of the most important maintenance tasks. Your valve needs to correctly indicate the correct temperature and pressure. Otherwise, it can over-pressurize, dramatically increasing the risks of explosion.
- Flushing the Tank – This is best done in conjunction with your pressure valve maintenance. Flushing the tank is vital if you want to avoid major problems down the road. This is because sediment can easily buildup inside the tanks itself. This can have a negative effect on your heating system’s overall energy efficiency. It makes your heater work hard thus consume more energy. On top of that, it also heightens the risk of clogged water lines.
- Fixing Leaks – Leaks are often caused by problems in your home’s plumbing system. Unfortunately, these two are inextricably linked. Fixing a leak is easy enough, all you need is a bit of hard work and the right types of material.
- Lighting the Pilot – As you may already know, there are two types of water heaters. The ones that make use of a pilot light are categorized as gas heaters. Doing this is literally as easy as pushing a button.
Put the gas valve in the “on” position. From there, you will need to set the control knob to pilot and press the igniter button. Doing this should make the pilot light turn on; you will notice it through the small flame that can be seen from the view pane. Do not forget to set its temperature to 120 degrees Fahrenheit.
This article presented a couple of the basic tips to properly maintain your home’s water heating system. As one of the most vital parts of your home, you need to ensure that it stays in the best shape possible.